What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
13.06.2025 02:43

The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
but this device (an Inductor) … impedes the rapid changes in the current.
Jefferies Is Doubling Down On Nvidia. Here Are 3 Other Stocks The Firm Loves Now. - Barchart.com
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
It seems Mohan does not understand the difference between a comment and an Answer.
Catch Jupiter and Mercury side by side in the evening sky this week - Space
The other is “what does a “fuse” do?”
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
so, what happens?
Job openings rise in middle of trade wars, but businesses are slower to hire - MarketWatch
What does a fuse do?
but I think this circuit , shows a few more pieces.
He then describes the function of a fuse.
One Molecule to Sleep and Wake: A New Brain Switch Discovered - Neuroscience News
nine
These are simplified answers to the original question, and does not change anything I wrote above.
A fuse is a non-resetable over current circuit protector.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This device then solves the entire problem.
First Sentence:
What is the most craziest dream you ever had?
Now when you have a certain ac resistance, then a current flows in a loop.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
(Dc diagram shown, AC is similar).
Which current F1 drivers should switch teams based on historical patterns?
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
Here is a simplified AC power diagram.
He then describes Rainy Season and Lightning.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
The Apartment Glut Is Ending and Demand Is Rising. Rents Are Headed Up, Too. - Barron's
2024–10–14 [Omar Gharbi Omar Gharbi ]
An AC voltage/ current source, and an ac inductive load.
What is lightning?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
But… the neutral is now “floating” because of the 1 ohm resistance.
What makes outside showers appealing? Why are they not commonly seen?
These devices are installed between the “hot” and “neutral” and protective ground.
One is “what exactly is in a ‘surge protector’ ? ”
the problem then depends on "how fast does the fuse operate?".
Delete Every App On Your Smartphone That’s On This List - Forbes
Can the fuse protect the electronic devices from lightning instead of a surge protector.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
So, the voltage could go up to 500 volts, and the fuse will not open up.
For this case there are devices called Metal oxide varistors (MOV).
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
2024–10–10[John johnson John Johnson ]
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
A circuit breaker is similar, but is resettable.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Barnstars:
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Because the load is inductive, the current lags the voltage.(by a bit).
He then asserts :
I post the exact comment here.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This one hit behind the barn.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This is where this question deviates from being a 'generic' question, and becomes more specific.
2024–10–16 [ OO OLAOYE OYEBODE ]
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
This is where the MOV conducts again, and dissipated the energy.
a photo is worth a thousand words.
Edit 2024–10.
At least they know the answer if they wanted it.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
But it can get overloaded, and no longer works.
[old diagram got deleted by accident]
One
Upvotes:
The bolt then partially travels down the line to your home.
[image of Common-mode choke]
This is 'the assistant's answer'
what exactly is a ‘surge’ protector?
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
In schematic diagrams this is the symbol for a fuse:
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
eight
The third is lightning and “how it gets conducted into a home.”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
At one ohm, the resistor has a maximum of 1 watt power.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
It also is a device that limits the change in current flow.
There are three different concepts here that are getting confused.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
There are two important concepts here.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.